V8 Block Identification

From Holdenpaedia
Jump to: navigation, search

Page created by T May 10th 2014:

Back to the Engine Section

Late model Holden V8 block without Engine capacity casting. Photo by myeh. Click to Enlargen.

V8 Block Identification:

submitted By myeh 10/05/14@17:57 This is the pad on the block that usually has the engine size letters ie 253,308. However on the late VS and all VT Commodore blocks this was left blank. This was blank because Holden were using the same block to make both the 5.0 litre and 5.7 litre motors.

End of submission by myeh.

Links:

Terms:

Terms

Back to the Engine Section