Trimatic Special Tools

From Holdenpaedia
Jump to: navigation, search

Originally submitted by T:

Back to Trimatic Index  

The 7AT15 Modulator Spanner. It is 1 1/4" AF and 3.0 mm thick. Click to Enlargen. Photo by T.

Special Tools:

Selector Seal Remover/Installer T-1001. The same Tool is used with TH-350's, TH-400's TH-700's and Trimatics here.  

Special Tools
Selector Seal Modulator Spanner Band Adjustment Bellhousing
Remover/Replacer 7AT15 The gap between the Modulator and Case is too narrow for most spanners. 7AT4 (E1504) Allen Key and Torque Wrench Adapter Special Tool  The 7AT12 tool is used to align the Bellhousing so that the Front Bearing will have the correct clearance for the Oil Pump.
   1 1/4" AF Spanner 3mm thick
 Snap On FA6E 3/16" Allen Key with 3/8"Socket Drive.
 The nose cut from a  of a 6 or 8 Cylinder Torque Converter does the same job. This provides access to the Bellhousing Bolts.
       
 

 

 
The 7AT15 Modulator Spanner. It is 1 1/4" AF and 3.0 mm thick. Click to Enlargen. Photo by T.
 
7AT4 Band Tensioning Adaptor and Warren & Brown in/lb Torque Wrench. Click to enlargen. Photo by 383HGBroughgam.
 
7AT4 Band Tensioning Adaptor fitted to Warren & Brown in/lb Torque Wrench. Click to enlargen. Photo by 383HGBroughgam.
     

 

Trimatic Selector Seal Remover/Replacer Tool. Photo by T. Click to Enlargen.
Trimatic Selector Seal Remover/Replacer Tool. Photo by T. Click to Enlargen.

Links:

Snowdownunder's Shed  

Terms:

Terms

Back to Trimatic Index