Trimatic ID Plate Codes
From Holdenpaedia
Page created by Hairy-Dude October 24th 2005:
[edit] Trimatic ID Plate Codes:
These are the codes found on the transmission ID plate. The codes are listed here according to model.
[edit] LC Torana:
HG - All 4 Cylinders
HH All 6 Cylinder except high performance
HJ All 6 Cylinder high performance
[edit] LJ Torana:
HS 161 (2.25L) 6 Cyl
HN 173 (2.85L) 6 Cyl
HL 1159cc & 1256cc 4 Cyl
HY 1600cc (OVH) 4 Cyl
[edit] LH Torana:
HN 173 (2.85L) 6 Cyl
HT 202 (3.3L) 6 Cyl
HO 253 (4.2L) V8
KA 1900cc 4 Cyl
[edit] LX Torana:
KJ 202 (3.3L) 6 Cyl
KK 253 (4.2L) V8 with all diff ratios except 2.6:1
KX 253 (4.2L) V8 with diff ratio of 2.6:1
KH 173 (2.85L) 6 Cyl (LX Torana)
KY 1900cc 4 Cyl (LX Torana)
[edit] HG Holden:
HH All 6 Cylinder execpt high performance
HJ All 6 Cylinder high performance
[edit] HQ Holden:
HN 173 (2.85L) 6 Cyl
HT 202 (3.3L) 6 Cyl
HO 253 (4.2L) V8
HP 308 (5.0L) V8
[edit] HJ Holden:
HN 173 (2.85L) 6 Cyl
HT 202 (3.3L) 6 Cyl
HO 253 (4.2L) V8
* From HJ onwards, the Turbo 400 replaced the Trimatics behind 308 V8's
[edit] HX/HZ Holden:
KJ 202 (3.3L) 6 Cyl
KK 253 (4.2L) V8 with all diff ratios except 2.6:1
KX 253 (4.2L) V8 with diff ratio of 2.6:1
[edit] WB Holden:
FU 202 (3.3L) 6 Cyl with all diff ratios except 4.44:1
FV 202 (3.3L) 6 Cyl with diff ratio of 4.44:1
FX 253 (4.2L) V8
FW 202 (3.3) 6 Cyl with 4.44 diff and T-Bar Floor Shift
[edit] VB Commodore (Series 3 Trimatics):
FO 202 (3.3L) 6 Cyl
KO 253 (4.2L) V8
[edit] VC Commodore:
FS 202 (3.3L) 6 Cyl
FR 253 (4.2L) 8 Cyl
[edit] VH Commodore:
FY 1900cc 4 Cyl
LL 173 (2.8L) 6 Cyl
FP 202 (3.3L) 6 Cyl
FR 253 (4.2L) V8
[edit] VK Commodore:
LP 202 (3.3L) 6 Cyl EST
LR 202 (3.3L) 6 Cyl EFI
LS 308 (5L) V8
[edit] VL Commodore:
[edit] TX-TC Gemini:
KE 4 Cyl
[edit] TD-TG Gemini:
LA 4 Cyl
(The LA code was carried through the TD to TG series, but at the change from TE to TF, the gear selector was changed to the right hand side.)
This information is compiled from the HQ Holden Service Manuals, HJ Service Manual Supplement, HX Service Notes, HZ Service Notes, WB Service Manual Supplement and the VB and VH Commodore Service Manuals. I'll add more info if and when I can get it. Thanks to "Poida" for supplying the LC/LJ/LH Torana, Gemini and the HG Holden codes, and thanks to "SeaSalt" for supplying the VC and VK codes. Also, thanks to Phil for supplying the VL Commodore code.
If anyone has any info on the ones I have missed, please email me at hairydude1(at)optusnet(dot)com(dot)au, with the relevant changes to the email address, and I'll put the codes up here.
Cheers,
Hairy-dude
[edit] FW Trimatic:
By Dr Terry 27/04/10@21:55
According to my lists an FW Tri-Matic was fitted to WB 3.3 with a 4.44 rear axle & floor shift.
It has the shift lever on the LHS.
End of submission by Dr Terry.
[edit] LW Trimatic Image:
By 383HGBrougham 27/04/10@14:31
Looks like a LW'A' calibration from a VK-VL Commodore. Can tell by the LHS shift linkage. There is no FW coded trimatic in my documentation, BUT dont go by the code as the transmission looks like it has been reco'd at some time and could actually be anything!
End of submission by 383HGBrougham.
