Remote Starter

From Holdenpaedia
Jump to: navigation, search

Page created by T Mar 20th 2012:

Back to Electrical Meters

Remote Starter Switch. Connect this to the Starter Solenoid while working under the Bonnet to activate the Starter. Use this when Compression Testing and make sure the Ignition Circuit has been completely disabled first. Photo by HRAmbo. Click to Enlargen.

Remote Starter:

Operation:

Connect this to the Starter Solenoid. It's used to activate the Starter while working under the Bonnet . Use this when Compression Testing. Make sure the Ignition Circuit has been completely disabled first and the car is in Neutral if it's a Manual or Park if it's an Automatic.

Connection:

Connect one lead to the large nut on the passenger side of the starter solenoid and the other lead to the centre connection.
Connect one lead to the large nut on the right and the other lead to the centre connector with the purple wire. Click to Enlargen. Image by MattsEHute.
 

Links:

Terms:

Terms

Back to Electrical Meters