EFI VK Emissions

From Holdenpaedia
Jump to: navigation, search

Page created by T Sept 18th 2007: Back to the Emission Section

EFI VK Emission equipment. Inlet Manifold Vacuum Source connector. Click to Enlargen. Photo by HQ_1TON_NZ .
 

EFI VK Emissions:

Link to EFI VK Connections

EFI VK Emission equipment. Exhaust Gas Recirculation Valve. D connects to the Throttle Body above the Throttle. Click to Enlargen. Photo by HQ_1TON_NZ .
 
EFI VK Emission equipment. The lowest connection in the image connects to the Fuel Regulator. The connector next to it is the vacuum source for the Trimatic Modulator. Click to Enlargen. Photo by HQ_1TON_NZ .
 
EFI VK Emission equipment. Thermal Vacuum Switch. See the link for connections (there are 2 types of TVS). Click to Enlargen. Photo by HQ_1TON_NZ .
 
EFI VK Emission equipment. Click to Enlargen. The "J" connection here may be EGR, Vacuum Spark Advance or Cannister purge. All these connections are above the Throttle. Details to be updated. Photo by HQ_1TON_NZ .
 
EFI VK Emission equipment. Click to Enlargen. The "?" shows the Thermal Vacuum Switch for the EGR Valve. Photo by HQ_1TON_NZ .
 
EFI VK Emission equipment. Click to Enlargen. The letter K shows the PCV connection to the Air Cleaner (L). Photo by HQ_1TON_NZ .
 
EFI VK Emission equipment. The letter L shows the PCV connection on the Air Intake. Click to Enlargen. Photo by HQ_1TON_NZ .
 
EFI VK Emission equipment. This image shows the Cannister Purge Connection, the EGR Connection and the Vacuum Spark Advance Connection. The rubber pipe has the EGR and Cannister lines connected for testing purposes. Click to Enlargen. Photo by HQ_1TON_NZ .
 

Links:

Terms:

Terms

Back to the Emission Section