Celica 5 Speed Into HD-HR

From Holdenpaedia
(Redirected from Celica 5Speed Into HD-HR)
Jump to: navigation, search

Celica 5 Speed Into HD-HR:

W55 Steel Case Is What I'm Using:

Things you will need are

5 Speed Celica box  (with the right shifter position) Bell housing (mine is a Dellow one), fork, clutch 3 Speed manual cross member,Speedo cable

</font></li></ol>

 <p align="left"> <p style="margin: 0in 0in 0pt" class="MsoNormal" align="left"> What needs to be done: <p style="margin: 0in 0in 0pt" class="MsoNormal" align="left"> 

  1. <p style="margin: 0in 0in 0pt" class="MsoNormal" align="left">The shifter is going to go though the floor support
  2. <p style="margin: 0in 0in 0pt" class="MsoNormal" align="left">

    Cut the floor support and support the floor

    again 

    (that's what the engineer wants)

  3. <p style="margin: 0in 0in 0pt" class="MsoNormal" align="left">

    Cut a hole in the floor

    (and support it engineer again)

  4. <p style="margin: 0in 0in 0pt" class="MsoNormal" align="left">Modify  the cross member
  5. <p style="margin: 0in 0in 0pt" class="MsoNormal" align="left">Get the tailshaft modified 
  6. <p style="margin: 0in 0in 0pt" class="MsoNormal" align="left">

    Get the speedo reading right

    
    

    (engineer wont pass car if its wrong)

     
     
<p style="margin: 0in 0in 0pt" class="MsoNormal" align="left"> <p style="margin: 0in 0in 0pt" class="MsoNormal" align="left"> <p style="margin: 0in 0in 0pt" class="MsoNormal" align="left"> <p style="margin: 0in 0in 0pt" class="MsoNormal" align="left"> <p style="margin: 0in 0in 0pt" class="MsoNormal" align="left"> <p style="margin: 0in 0in 0pt" class="MsoNormal" align="left"> <p style="margin: 0in 0in 0pt" class="MsoNormal" align="left">How To Do It:
  1. <p style="margin: 0in 0in 0pt" class="MsoNormal" align="left">Disconnect the handbrake (chock the  car 1st)
  2. <p style="margin: 0in 0in 0pt" class="MsoNormal" align="left">Take out the tail shaft
  3. <p style="margin: 0in 0in 0pt" class="MsoNormal" align="left">Take the starter motor out                                                                                                                                                        (if you have a blue motor starter you will need to take the extractors off too)
  4. <p style="margin: 0in 0in 0pt" class="MsoNormal" align="left">Disconnect ALL linkages to the gearbox
  5. <p style="margin: 0in 0in 0pt" class="MsoNormal" align="left">Take old gearbox out
<p style="margin: 0in 0in 0pt" class="MsoNormal" align="left"> <p style="margin: 0in 0in 0pt" class="MsoNormal" align="left"> <p style="margin: 0in 0in 0pt" class="MsoNormal" align="left"> <p style="margin: 0in 0in 0pt" class="MsoNormal" align="left"> <p style="margin: 0in 0in 0pt" class="MsoNormal" align="left"> <p style="margin: 0in 0in 0pt" class="MsoNormal" align="left"> <p style="margin: 0in 0in 0pt" class="MsoNormal" align="left"> <p style="margin: 0in 0in 0pt" class="MsoNormal" align="left"> <p style="margin: 0in 0in 0pt" class="MsoNormal" align="left"> <p style="margin: 0in 0in 0pt" class="MsoNormal" align="left"> <p style="margin: 0in 0in 0pt" class="MsoNormal" align="left"> <p style="margin: 0in 0in 0pt" class="MsoNormal" align="left">*Info On Celica Boxes (Steel Case):
  • <p style="margin: 0in 0in 0pt" class="MsoNormal" align="left">Gearbox weight – 40kg
  • <p style="margin: 0in 0in 0pt" class="MsoNormal" align="left">Gearbox length – 22”
  • <p style="margin: 0in 0in 0pt" class="MsoNormal" align="left">Front Shaft – 21 splines x 29mm
  • <p style="margin: 0in 0in 0pt" class="MsoNormal" align="left">Tailshaft splines – 21
  • <p style="margin: 0in 0in 0pt" class="MsoNormal" align="left">Oil Capacity – 2.6 litres
<p style="margin: 0in 0in 0pt" class="MsoNormal" align="left">4 Shifter Positions:
  1. <p align="left">18”
  2. <p align="left">19” 
  3. <p align="left">20 1/2” 
  4. <p align="left">21” 
<p align="left">  
<p align="left"> <p style="margin: 0in 0in 0pt" class="MsoNormal" align="left"> <p style="margin: 0in 0in 0pt" class="MsoNormal" align="left"> <p style="margin: 0in 0in 0pt" class="MsoNormal" align="left"> <p style="margin: 0in 0in 0pt" class="MsoNormal" align="left"> <p style="margin: 0in 0in 0pt" class="MsoNormal" align="left"> <p style="margin: 0in 0in 0pt" class="MsoNormal" align="left"> <p style="margin: 0in 0in 0pt" class="MsoNormal" align="left"> <p style="margin: 0in 0in 0pt" class="MsoNormal" align="left"> <p style="margin: 0in 0in 0pt" class="MsoNormal" align="left"> <p style="margin: 0in 0in 0pt" class="MsoNormal" align="left"> <p style="margin: 0in 0in 0pt" class="MsoNormal" align="left">I'LL ADD TO THIS PAGE AS I DO THE<p style="margin: 0in 0in 0pt" class="MsoNormal" align="left"> CONVERSION IN MY HD!!! </td><td width="289" height="482" align="right" valign="top"><p align="center"> <p align="center"> <p align="center"> <p align="center"> <p align="center"> <p align="center"> <p align="center"> <p align="center"> <p align="center"><img src="http://www.geocities.com/bubsyshd/BILD0414_small.JPG" border="2" alt="BILD0414.JPG (1820423 bytes)" width="180" height="135" /><p align="center"> <p align="center"> <p align="center">THE RIGHT SHIFTER POSITION <p align="center"> <p align="center"> <p align="center"> <p align="center"> <p align="center"> <p align="center"> <p align="center"> <p align="center"> <p align="center"> <p align="center"> <p align="center"> <p align="center"><img src="http://www.geocities.com/bubsyshd/BILD0402_small.JPG" border="2" alt="BILD0402.JPG (2564928 bytes)" width="175" height="131" /><p align="center"> <p align="center"> <p align="center">W55 CELICA 5SPEED AND BELL HOUSING</td></tr></tbody></table>  

Links:

HQ_SS' Shed

Terms:

Terms
Back to Gearboxes Transmissions and Differentials